![]() Learn how to build a simple DIY workbench using 2x4 lumber and plywood. Attach to the workbench with 1 1/4-inch wood screws. Position on top of the workbench allowing for a 3-inch overhang on all sides. The offset of the image can be set during import, or changed later through its properties. This free stock photo is also about: Saw, Wood, Hands, Tools, Maker, Merchant, Woodwork, Workbench, and Construction. Measure, mark, and cut 3/4-inch plywood top to size. The pegboard is made of perforated fiber plate. The legs are 4 rough solid wood planed to 3. The support structure and the workbench are made of 2 and 1' raw solid wood planed at 1' and 1. This means that the image will be slightly behind the plane where you draw your 2D geometry, so you won't draw on the image itself. Under the workbench there is a shelf that allows the storage of medium to large power tools. Tracing over an image works best if the image has a small negative offset, for example, -0.1 mm, from the working plane. (We like Minwax PolyShade.) After one coat of the stain/polyurethane combo, add a couple more coats of regular polyurethane to the work surfaces. The recommendation is to have the imported image at a reasonable resolution.Ī major use of this workbench is tracing over the image, with the Draft or Sketcher tools, in order to generate a solid body based on the contours of the image. Finish the workbench with a combination stain and polyurethane.The image is imported with relation of 1 pixel to 1 millimeter.Like a Sketch, an imported image can be attached to one of the main planes XY, XZ, or YZ, and given a positive or negative offset.Scale image plane: scale an image imported to a plane.Smooth down the legs into your shape and file the wood. Make the wood even and cut it to your sizeMark with a pencil where you want to make a carving. Follow the line of the grain to smooth out knots. ![]() Create image plane.: import an image to a plane in the 3D view. Prepare the wood and make sure you have enough thickness on your wood.Open.: open an image on a new viewport.The Image Workbench manages different types of bitmap images, and allows you to open them in FreeCAD.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |